HP H-series Enterprise Fabric Management Suite Software User Manual
Page 116
116 Managing Switches
Applying all profiles on a switch to other switches
You can apply all profiles on a switch to one or more switches in a fabric using the Call Home Profile
Multiple Switch Apply dialog box (
). The Call Home Profile Multiple Switch Apply dialog box
(
) appears if you select the Apply Changes to Multiple Switches in Fabric option on the Call
Home Profile Manager dialog box (
), and click Apply.
Figure 66
Call Home Profile Multiple Switch Apply dialog box
The Available Switches list shows all the switches in the fabric. Switch names that are disabled do not have
current Call Home firmware and cannot receive profiles. The Selected Switches list shows the switch names
that are to receive all profiles from the switch.
To apply a profile to other switches:
1.
Select the switches to receive the profile from the Available Switches list.
2.
Click >> to move your selections to the Selected Switches list.
3.
Click OK to start the process. The Results area indicates success or failure of applying the profile to the
selected switches.