HP H-series Enterprise Fabric Management Suite Software - Manual (Page 13)

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 13
4. Enter a fabric name, an entry switch, login name and password in the Add a New Fabric dialog box.
Figure 3 Add a New Fabric dialog box
A fabric name is recommended, but not required, and must be unique.
• The Entry Switch field can be the IP address or Domain Name Server (DNS) name of the switch
through which to manage the fabric. For more information about addresses and host names, see
” Network IP configuration ” (page 100).
• The factory login name and password are admin and password. The password is for the switch
and is stored in the switch firmware. For information on user accounts, see ” Managing user
accounts ” (page 79).
5. Click Add Fabric.
6. For security reasons, you are prompted to change your user account password initially set up by the
administrator. You are prompted each time you attempt to open the fabric until you change the
password. Click OK, and change the user account password.
7. If the entry switch has SSL (Secure Socket Layer) enabled, the switch will generate and display a Verify
Certificate dialog box that you must accept before gaining access to the fabric.
Exiting Enterprise Fabric Management Suite
To exit an Enterprise Fabric Management Suite application session:
1. Select File > Exit.
2. If you have not yet saved the default fabric view file, the Save Default Fabric View File dialog box
( Figure 4 ) prompts you to save the current fabric view as the default fabric view file. Enter an encryption
key in the Default Fabric File Encryption Key field.
3. Re-enter the encryption key in the Re-enter Encryption Key to Confirm field. You can also leave the fields
blank.
4. Click Save View File to save the current set of fabrics to the default fabric view file in the working
directory. You can also do one of the following:
• Click Exit Without Saving to close the session without saving the view file.
• Click Cancel Exit to sustain the session.
Figure 4 Save Default Fabric View File dialog box