HP Storage Mirroring Software - Manual (Page 201)

13 - 21
Service 4200 Info In band task %1 submitted from %2 by %3
at %4 No action required.
4201 Warning In band task %1 discarded (submitted from
%2 by %3 at %4) A task may be discarded in the following
scenarios: all connections to a target are
manually disconnected, replication is
stopped for all connections to a target, or
an auto-disconnect occurs. If one of these
scenarios did not cause the task to be
discarded, contact technical support.
4202 Info Running <trigger point> in band script: %1
(task %2 submitted from %3 by %4 at %5) No action required.
4203 Success Completed run of in band script: %1 (exit
code %2) No action required.
4204 Error Error running in band script: %1 Review the task and its associated script(s)
for syntax errors.
4205 Warning Timeout (%1 seconds) running in band
script: %2 The timeout specified for the script to
complete has expired. Storage Mirroring
will continue with normal processing. You
may need to manually terminate the script
if it will never complete.
4206 Warning Run timeout disabled for in band script:
%1 The timeout period was set to zero (0).
Storage Mirroring will not wait for the
script to complete before continuing. No
action is required.
4207 Warning In band scripts disabled by server - no
attempt will be made to run %1 Enable task command processing.
5002 Info Placeholders were modified to %1. No action required.
10000 Error Connect failed to node %1 for resource
%2. Adding node to reconnect list. Ensure that GeoCluster is running on all
possible owners and that it can
communicate on the network selected for
mirroring and replication traffic.
GeoCluster will try to reestablish a
connection using the check unresponsive
node interval specified for the resource.
10001 Info Reconnect succeeded to node %1 for
resource %2. Will be added as a possible
owner when mirror is complete. No action required.
10002 Error Disk check failed on node %1 for resource
%2. Removing as a possible owner. Ensure that GeoCluster is running on all
possible owners and that it can
communicate on the public network. Also
ensure that the disk specified for the
resource is functioning correctly on all
possible owners.
10003 Error Owner %1 of the quorum resource %2
couldn't access the arbitration path %3.
Network may be down. Ensure that the network used to access
the arbitration path is up and that the
server is operational. Also ensure that the
arbitration share path does exist and that
the account running the cluster service has
write privileges to the share path.
10004 Warning Failover of the group %1 is being delayed.
Group will be brought online when the
target queue is below the limit or the
timeout has expired. No action required.
Category ID Severity Message Required Response