HP Storage Mirroring Software - Manual (Page 292)

A - 29
Schedule Window
Set
Command SCHEDULE WINDOW
Description Sets criteria to only allow transmissions during a certain period of time
Syntax SCHEDULE < target_machine > WINDOW < hh:mm > TO < hh:mm >
Options ! target_machine —Name of the target machine
! hh:mm —Time in hour:minute format using the 24 hour clock. The first time is when the
transmission will begin and the second time is when the transmission will end.
Examples schedule jersey window 23:00 to 06:00
Notes Establishing a transmission window by itself is not sufficient to start a transmission. You will need to
specify a start criteria.
Command SET
Description The Text Client/DTCL sends a request to Storage Mirroring to modify the value of a Storage
Mirroring program setting. The setting is immediately applied and is then forwarded to the registry
where it is also applied.
Syntax SET < option >=< value > [ machine ]
Options ! option —See Storage Mirroring Text Client program settings on page 14-11.
! value —See Storage Mirroring Text Client program settings on page 14-11.
! machine —Name of the machine
Examples ! set netport=1100
! set VerifyLogName=”HA server.log”
! set DefaultAddress=”129.12.34.3”
Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or service is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the service must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings on page 14-11 for details on each configuration option.
! If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.