HP Storage Mirroring Software - Manual (Page 281)

A - 18
Monitor Stop
Monitor Use
Niclist
Orphans Start
Command MONITOR STOP
Description Stops monitoring the source machine for a failure
Syntax MONITOR STOP < monitor > [ON < target_machine >]
Options ! monitor —Name of the source machine designated as the monitor
! target_machine —Name of the target machine that will no longer be monitoring the source
machine
Examples monitor stop indy on jersey
Command MONITOR USE
Description Specifies the source machine designated as the monitor that will be used in subsequent monitor
commands
Syntax MONITOR USE < monitor >
Options monitor —Name of the source machine designated as the monitor
Examples monitor use indy
Command NICLIST
Description Displays the NICs available on the specified target machine. Each NIC is assigned an integer value
and this value is used in the
monitor move command.
Syntax NICLIST [ target_machine ]
Options target_machine —Name of the machine
Examples niclist jersey
Notes ! If you do not specify a machine name, the value from the current target will be returned. If you
have not identified a target, no data will be returned.
! If you have not logged into the target machine, no data will be displayed.
Command ORPHANS START
Description Manual operation to remove any orphan files on the target
Syntax ORPHANS START con_id
Options con_id —Connection ID assigned to the source/target connection
Examples orphans start 1