HP Storage Mirroring Software User Manual
Page 241
14
-
15
EnableDHCP
Indicates if Storage Mirroring DHCP support is enabled
Values
: (
0
) Disabled
(
1
) Enabled
Default
:
1
GUI Setting
: None
EnablePerformance
Tracking
This entry will be used in the future.
EnableTaskCmd
Processing
Queues tasks inline with replication data
Values
: (
0
) Disable task command processing
(
1
) Enable task command processing
Default
:
0
GUI Setting
: Server Properties, Setup tab, Setup Options, Enable Task Command Processing
ExtensionNumber
Used by the Storage Mirroring log files.
FailAllAddresses
Specifies whether or not to failover all IP addresses if only one monitored IP address fails
Values: (
0
) Do not failover all IP addresses
(
1
) Failover all IP addresses
Default:
1
GUI Setting
: Failover Control Center, Monitor Settings, Items to Failover, IP Address(es), All
FailbackHostname
Returns the host SPN (Service Principle Name) to its original setting on failback
Values
: (
0
) Disabled
(
1
) Enabled
Default
:
0
GUI Setting
: Failover Control Center, Monitor Settings, Active Directory, Failback Hostname
If you are using Active Directory, this option should be enabled or you may experience problems
with failback.
FailoverHostname
Automatically removes the host SPN (Service Principle Name) from Active Directory on the
source
Values
: (
0
) Disabled
(
1
) Enabled
Default
:
0
GUI Setting
: Failover Control Center, Monitor Settings, Active Directory, Failover Hostname
If you are using Active Directory, this option should be enabled or you may experience problems
with failover.
FailoverOnRoute
Failure
Determines if failover will occur when receiving a router message back from an IP address on the
network
Values
: (
0
) Failover will not occur when receiving a destination host unreachable message
(
1
) Failover will occur when receiving a destination host unreachable message
Default
:
1
GUI Setting
: None
FCCHelpPath
The path and file name to the Failover Control Center online help file
Default:
C:\Program Files\OpenView\Storage Mirroring
\online help\fcc\ wwhelp.htm
GUI Setting
: None
Do not change this value or the online help will not work.
Program Setting
Description