HP LaserJet 6L Pro Printer - Manual (Page 26)

24 Chapter 2 - Printer control panel EN
Using the control panel
Use the control panel button to determine the status of your printer
and to accomplish the following tasks:
Status Condition Cause(s) Action(s)
No lights are on or
blinking. Printer is in SleepMode
or printer has been
disconnected. To print, press and
release the control panel
button or send the job to
print. If no response,
check power cord.
Ready light is on steadily. Printer is ready to print. No action is necessary.
Press and release control
panel button to print self-
test page.
Data light is on steadily
and the Ready light is
blinking. Printer is receiving or
processing data or
printing a self-test page
or form feeding. No action is necessary.
Data light and Ready light
both remain on. Unprinted data is in the
printer. Press and release the
control panel button to
print the remaining data.
See Chapter 4,
“Troubleshooting."
Data light is blinking. Printer is in Manual
Feed mode. Check that correct paper
is loaded. Press and
release control panel
button to print.