HP LaserJet 6L Pro Printer - Manual (Page 72)

70 Appendix B - Printer specifications EN
Environmental product stewardship
Hewlett-Packard has created the Environmental product stewardship
program on a corporate-wide level to ensure that HP products
conform to national and worldwide environmental standards.
Protecting the Environment
Hewlett-Packard Company is committed to providing quality products
in an environmentally sound manner. This HP LaserJet printer has
been designed with several attributes to minimize impacts on our
environment.
This HP LaserJet printer design eliminates:
● Ozone production — This HP LaserJet printer uses charging
rollers and generates no appreciable ozone gas (O
3
).
This HP LaserJet printer design reduces:
● Energy consumption — Energy usage drops from an average of
120W during printing to as little as 5W while in Standby/Sleep
mode. Not only does this save natural resources, but it also saves
money without affecting the high performance of this printer. This
product qualifies for
E NERGY S TAR. E NERGY S TAR is a
voluntary program established to encourage the development of
energy-efficient office products.
E NERGY S TAR is a U.S. registered service
mark of the U.S. EPA. As an E NERGY S TAR
partner, Hewlett-Packard Company has
determined that this product meets
E NERGY
S TAR Guidelines for energy efficiency.
● Toner consumption — EconoMode uses significantly less toner,
which may extend the life of the toner cartridge.
● Paper use — This printer allows manual duplexing (two-sided
printing) and this reduces paper usage and the resulting
demands on natural resources.
Physical specifications, continued
Base memory 4 MB of ROM and 4 MB of RAM
Print Resolution 600 dots per inch (dpi)
Duty Cycle 6000 single-sided pages per month