Prerequisites, X86_64 – HP Intelligent Infrastructure Analyzer Software User Manual
Page 13
6 Installing, and removing IIASCIM Server v2.0 for SLES
x86/x86_64
NOTE:
HP IIASCIM server must be installed on the Windows host platform which can be monitored
by HP IIAS. This server provides a CIM interface to HP IIAS, and enables data collection.
Prerequisites
Ensure that the root user access to the system is available.
x86
•
The IIASCIMServer_x86.sh script must have executable permissions. If it does not have
the executable permissions, run the following command:
#chmod +x ./IIASCIMServer_x86.sh
x86_64
•
The IIASCIMServer_x86_64.sh script must have executable permissions. If it does not
have the executable permissions, run the following command:
#chmod +x ./IIASCIMServer_x86_64.sh
To install HP IIASCIM Server v2.0 package for SLES x86/x86_64:
1.
Download HP IIASCIM Server v2.0 package for SLES x86/x86_64 from the HP IIAS website:
.
2.
Select a folder (for example, /opt/temp). and save the HP IIASCIM Server v2.0 package.
3.
Untar the file IIASCIMServer-2.0.0.0-0.i686-RHEL.tar (32-bit) or
IIASCIMServer-2.0.0.0-0.x86_64-RHEL.tar
(64-bit) depending on the platform.
4.
Run ./IIASCIMServer_x86.sh (32-bit) or ./IIASCIMServer_x86_64.sh (64-bit)
depending on the platform.
NOTE:
•
If IIASCIM Server is not installed on the system, then the installer installs a fresh copy of the
IIASCIM Server.
•
If the same version of IIASCIM Server is available, then the installer prompts for an
uninstallation.
•
See the
for the set of supported platforms.
Removing HP IIAS CIMServer v2.0 from SLES x86/x86_64
To remove HP IIASCIM Server v2.0 from SLES x86/x86_64:
•
Go to the location where the IIASCIM Server v2.0 for SLES x86/x86_64 is installed.
•
Run ./IIASCIMServer_x86.sh script, or the ./IIASCIMServer_x86_64.sh script
depending on the platform.
Prerequisites
13