HP Intelligent Infrastructure Analyzer Software - Manual (Page 28)

Table 8 Topology Module
Depiction Topology module
A relation between a host and its HBA.
The relation between a host and its HBAs.
NOTE: The connectivity between any two SAN components is shown only by a single line, even
if there are multiple physical connections between the components. In case of multiple physical
connections, a hatch (||) is shown across the line at the center.
Besides the hatch number of good connections or number of total connections will be shown as
for example: || 2/3. In this example, out of 3 connections 2 are in good state. State of connections
are shown in the tool tip.
Figure 11 SAN Topology
28 Using HP IIAS