HP Intelligent Infrastructure Analyzer Software - Manual (Page 42)

NOTE:
•
SFP monitoring and diagnostics are not performed for components that do not meet the above
mentioned requirements.
Firmware prerequisites for SFP diagnostics specific to 3PAR storage device
SFP monitoring and diagnostics requires:
•
3PAR storage device with Inform OS 3.1.2 and above.
SAN Diagnostic GUI
The columns in the table display the event attributes that are:
•
ID – displays the diagnostic ID (for example: D1).
•
Severity – displays the severity level of the event.
•
Component
•
Time – displays the time when the event was generated.
•
Description – displays the diagnostic solution.
42 Using HP IIAS