HP Integrity NonStop H-Series - Manual (Page 33)

Cabling the Fibre Channel Converter
9800FC (CT9800FC) Fibre Channel Converter Installation and User’s Guide— 524957-003
3 -5
Installing Fiber Interface Cables
Installing Fiber Interface Cables
1. Connect one end of the fiber cable to port A on the tape drive. See Figure 3-4 .
Refer to Appendix A, Multimode Fiber Optic Cables for cable part numbers.
2. Connect the other end of the cable to the GBIC on the Fibre Channel converter.
See Figure 3-5 .
Figure 3-4. Location of Fiber Ports on the Tape Drive