HP Integrity NonStop H-Series - Manual (Page 4)

Contents
9800FC (CT9800FC) Fibre Channel Converter Installation and User’s Guide— 524957-003
ii
4. SCF Configuration
4. SCF Configuration
Configuring the Fibre Channel Converter 4-1
Configuring the Storage Devices 4-2
5. Troubleshooting the Fibre Channel Converter
TSM/OSM 5-1
Visual Inspection 5-1
Technical Support 5-1
LED Status Lights 5-2
A. Multimode Fiber Optic Cables
62.5/125 Multimode Fiber-Optic Cables
(676x-x) With SC Connectors A-2
62.5/125 Multimode Fiber-Optic Cables (F9x or F12x) A-2
F9x Cables With FDDI Connectors A-3
F12x Cables With FDDI Connectors and SC Connector A-3
SCSI Cables A-3
B. Product Specifications
Fibre Channel Converter B-1
Power Requirements B-2
Connections Supported B-2
Safety and Compliance
Index
Figures
Figure 1-1. Example of the Fibre Channel Converter Configuration 1-1
Figure 1-2. 7290 Enclosure 1-5
Figure 1-3. Seven Fibre Channel Converters Installed in an Enclosure 1-6
Figure 1-4. Two 7291 Enclosures Stacked on a 7290 Enclosure 1-7
Figure 1-5. Two 7291 Enclosures Stacked on a System Enclosure 1-8
Figure 1-6. 7291 Enclosure on Top of a Tape Drive Enclosure 1-9
Figure 3-1. Example of the Fibre Channel Converter Configured With a Tape Drive
3-2
Figure 3-2. Rear Panel Components 3-2
Figure 3-3. ServerNet/DA 3-4
Figure 3-4. Location of Fiber Ports on the Tape Drive 3-5
Figure 3-5. Location of the GBIC on the Fibre Channel Converter 3-6
Figure 3-6. FC LED Illuminated 3-7