A supported external storage systems, External systems, Hus vm storage system – HP XP P9500 Storage User Manual
Page 62: Hp p9500, Hp24000/hp20000 disk array, Hp12000 disk array/hp10000 disk array, Host mode option for a volume larger than 2 tb
A Supported external storage systems
This topic provides required configuration settings for many of the supported external storage
systems.
External systems
The storage systems in the following sections can be connected to HP P9500 as external storage
systems.
NOTE:
Not all supported systems’ information is provided here. If you do not find your storage
system, refer to
for a complete listing.
HUS VM Storage System
Use the following settings on the external system:
•
The port must be set to the host group for the Windows hosts (host mode 0C: Windows, host
mode 2C: Windows Extension).
•
The port attribute must be set to Target port or RCU target port.
•
If the external HUS VM Storage System uses Open LDEV Guard, set System Option Mode
(SOM) 701 to ON on the local P9500 system.
HP P9500
Use the following settings on the external system:
•
The port must be set to the host group for the Windows hosts (host mode 0C: Windows, host
mode 2C: Windows Extension).
•
The port attribute must be set to Target port or RCU target port.
•
If the external HP P9500 system uses Open LDEV Guard, set System Option Mode (SOM)
701 to ON on the local HP P9500 system.
HP24000/HP20000 Disk Array
Use the following settings on the external system:
•
The port must be set to the host group for the Windows hosts (host mode 0C: Windows, host
mode 2C: Windows Extension).
•
The port attribute must be set to Target port or RCU target port.
•
If the external HP24000/HP20000 Disk Array system uses Open LDEV Guard, set SOM 701
to ON on the local HP P9500 system.
HP12000 Disk Array/HP10000 Disk Array
Use the following settings on the external system:
•
The port must be set to the host group for the Windows hosts (host mode 0C: Windows, host
mode 2C: Windows Extension).
•
The port attribute must be set to Target port or RCU target port.
•
If the external USP system uses Open LDEV Guard, set SOM 701 to ON on the local HP P9500
system.
Host mode option for a volume larger than 2 TB
If a volume’s capacity is more than 2 TB, host mode option No. 24 must be enabled before mapping
it as an external volume. For instructions, see the LUN Management User's Guide for the HP12000
Disk Array / HP10000 Disk Array storage system.
62
Supported external storage systems