HP XP P9500 Storage - Manual (Page 78)

•
Do not set the command device security on the external storage system side for the command
device that is mapped as a remote command device.
•
You cannot create a LUSE volume using a remote command device.
•
You cannot create CVs using the VLL function in the remote command device.
•
Cache Residency is not available on the remote command device.
•
Command device information reported to the local host by the remote command device includes
the following:
◦ Serial number
◦ Vendor
◦ Device name. The name displayed for many individual storage system is listed in Supported
external systems’ path mode for external volumes (page 22) .
•
Errors can occur when operations are performed on the remote command device, even though
the status of the remote command device is normal. In this case, check the status of the
command device on the external storage system where the error actually exists.
Mapping a command device
To map a command device, select a command device that can be mapped and follow the procedure
in
“Mapping an external volume” (page 30) .
When mapped, the remote command device appears in the Remote Web Console Mapped Volumes
window, Device Name column as follows:
Displayed information in Device Name column Storage system
Format: "Emulation Type" + "-CM" Unified Storage VM
Example: OPEN V-CM, OPEN-3-CM Virtual Storage Platform
Universal Storage Platform V
Universal Storage Platform VM
SANRISE Universal Storage Platform
SANRISE Network Storage Controller
SANRISE9900V series
TagmaStore Universal Storage Platform
TagmaStore Network Storage Controller
Lightning 9900V series
VP9500
H24000
H20000
SANRISE H12000
SANRISE H10000
SANRISE H1024/H128
HP P9500
HP24000
HP20000
HP12000
HP10000
HP1024/HP128
DF600F-CM Unified Storage
Adaptable Modular Storage
Workgroup Modular Storage
78 Remote command devices