HP XP P9500 Storage - Manual (Page 89)

Description Item
Status of external paths. Status
• Normal: There are no problems, the system is usable.
•
Disconnect: The path has been intentionally disconnected.
• Checking: The system is checking the external path status.
•
Unknown: The status of the external path is not known.
• Warning: There are external paths whose status is not normal. You can check
their status in the View External LUN Properties window.
•
Blockade: The external path is blocked.
Number of Read/Write commands that can be queued to the external volume.
8 is set by default. QDepth
Number of seconds that should pass before I/O to the external volume times
out. 15 seconds is the default. I/O Timeout (sec.)
Time that will elapse from the time that a path goes down to the time when the
external volume is blocked. 10 seconds is the default. Path Blockade Watch(sec.)
When clicked, launches the Edit External Path Configuration window. Edit External Path Configuration
button
When clicked, launches the Edit Policies window. Edit Policies button*
When clicked, allows you to save table information to a file. Export button*
Add External Volumes wizard
Use this wizard to connect external volumes to the HP P9500.
See
“Mapping an external volume” (page 30) for instructions.
Each window in the wizard is identified below the wizard title. The windows are:
•
Select External Path Group window (page 89)
•
Add External Volumes window (page 90)
•
Confirm window (page 96)
Select External Path Group window
Part of the Add External Volumes wizard, use this window to select and set parameters for an
external path group.
Add External Volumes wizard 89