HP XP P9500 Storage - Manual (Page 97)

Description Item
Parity group numbers. Parity Group ID
External volume’s emulation type. Base Emulation Type
External volume’s top LDEV ID. Top LDEV ID
External volume’s top LDEV name. Top LDEV Name
External volume’s number of LDEVs. Number of LDEVs
External volume’s capacity. Capacity
SSIDs. SSID
CLPR used for accessing to the mapped external volume. CLPR
Displays operation mode of the external path. Path Mode
•
Single: Ordinarily, external paths that are set from only one port are
used even if alternate paths are set, In Single mode, alternate paths are
operated only in case of maintenance work failure.
• Multi: When alternate paths are set, external paths from several ports
are simultaneously used with load balancing.
•
APLB: When alternate paths are set, external paths from several ports
are simultaneously used with load balancing. External paths connected
to ports in Passive status are not used.
Displays I/O load balance system for external storage system. Load Balance Mode
• Normal Round-robin: Performs load balance in round-robin system.
•
Extended Round-robin: Load balance system is automatically switched
for sequential I/O and random I/O.
• Disable: Performs I/O operation with a single path, without load balance.
•
A hyphen (-) displays when the Path mode is Single.
External volume’s processor blade IDs. MP Blade ID
External volume’s LDEV details. LDEV Detail
NOTE: Information in this Confirm window assumes only a single task is executed. If multiple
tasks are executed, the window displays all configuration items. For information on these items,
return to the configuration window by clicking Back and refer to the topic on each configuration
window by clicking Help.
Edit Policies window
Use this window to change settings for mapped external volumes.
See
Editing external volume policies (settings) (page 36) for information.
Edit Policies window 97