Enww control-panel messages 135 – HP Color LaserJet 3800 Printer series User Manual
Page 149
Control panel message
Description
Recommended action
USB STORAGE FILE SYSTEM IS FULL
alternates with
Ready
To clear press
For the HP Color LaserJet 3000 and 3800
Series printers only.
The printer received a PJL file system
command that attempted to store something
on the file system but was unsuccessful
because the file system is full.
1.
Use HP Web Jetadmin software to
delete files from the storage device, and
then try again.
2.
To remove this message from the
display, press
.
for more information.
USB STORAGE IS WRITE PROTECTED
alternates with
Ready
To clear press
For the HP Color LaserJet 3000 and 3800
Series printers only.
The file system is protected and no new files
can be written to it.
1.
To enable writing to the storage device,
use HP Web Jetadmin to turn off write
protection.
2.
To remove this message from the
display, turn the printer off and then on.
for more information.
USB STORAGE X REMOVED
HP Color LaserJet 3000 and 3800 Series
printers only.
The USB storage accessory was removed
while the printer was turned on.
1.
Turn the printer off.
2.
To continue using the USB storage
accessory, reinstall it.
3.
Turn the printer on.
USE TRAY X <TYPE> <SIZE>
The printer is offering a selection of alternate
media to use for the print job.
1.
Use
and
to highlight a different
size or type, and then press
to select
the size or type.
2.
Press
to return to the previous size
or type.
for more information.
ENWW
Control-panel messages
135