HP Color LaserJet 3800 Printer series - Manual (Page 45)

Menu item Values Description
RAM DISK
(HP Color LaserJet 3000 and
3800 Series printers only)
AUTO
OFF
Determines how the RAM disk feature is configured.
Select AUTO to allow the printer to determine the optimal
RAM disk size based on the amount of available memory.
OFF disables the RAM disk, but a minimal RAM disk is still
available. The default is AUTO.
LANGUAGE A list of available languages
appears. Sets the default control-panel language.
See Language feature for more information.
I/O sub-menu
Use the I/O menu to configure the printer input/output options.
See Network configuration .
Menu item Values Description
I/O TIMEOUT 5–300 Selects the I/O timeout in seconds.
PAGE BUFFERING
(HP Color LaserJet 3600 Series
printer only)
OFF
ON
Sets whether the printer should maximize performance or
minimize engine wear while waiting for information to be
transferred. Select ON if the printer uses USB or Ethernet
10Base-T. The default is OFF.
PARALLEL INPUT
(HP Color LaserJet 3000 and
3800 Series printers only)
HIGH SPEED
ADVANCED
FUNCTIONS
Sets speed and other options for an optional parallel
connection.
EMBEDDED JETDIRECT Possible values are:
TCP/IP
IPX/SPX
APPLETALK
DLC/LLC
SECURE WEB
DIAGNOSTICS
RESET SECURITY
LINK SPEED
Configures the HP Jetdirect embedded print server.
NOTE For the HP Color LaserJet 3600 Series printer,
the only available network protocol is TCP/IP.
EIO 1 JETDIRECT
(HP Color LaserJet 3000 and
3800 Series printers only)
Values vary, depending
on the product in the EIO
slot. See the documentation that came with the EIO device.
Resets sub-menu
Use the RESETS menu to reset factory settings and to disable and enable sleep mode.
ENWW Configure Device menu 31