HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 61)

Network management 61
This summary screen displays the external connections for each network and is available to all authorized
users.
The following table describes the columns within the summary table on the Ethernet Networks (Summary)
screen.
Column name Description
Ethernet Networks
Shows the overall network status and network name
PID Shows the PID state of the network
Shared Uplink Set (VLAN ID) Shows the name of the shared uplink set and its VLAN ID (if applicable)
Port Status Shows whether each individual port associated with the network is linked
or unlinked and the current link speed
Connector Type Displays the type of connector on the port; for example, RJ-45
Connected to If the individual port is connected to a switch that supports LLDP, the switch
MAC address and switch port appear. A link is provided to obtain more
information about the far-end switch port.
Uplink Port Lists the status of the individual port and the location of the individual port
(enclosure, bay, port)
The following table describes the available actions in the Ethernet Networks (Summary) screen. Clicking
another link in the pull-down menu or left navigation window causes current edits that have not been applied
to be lost.
Task Action
Sort list view Click the down arrow next to the Show box to display All Networks, or
one specific network.
Edit a network Left-click on the network row, right-click to display a menu, and then select
Edit.
Edit a shared uplink set Left-click on the shared uplink set row, right-click to display a menu, and
then select Edit.
Define a new network
Right-click in the table to display a menu, and then click Add.