HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 77)

Network management 77
Field name Description
Connector type The type of connector on the port; for example, RJ-45
Connected to If the individual port is connected to a switch that supports LLDP, the switch
MAC address and switch port number appear. A link is provided to obtain
more information about the far-end switch port.
PID PID status icon (illuminated or not illuminated) for the port
Speed/Duplex Pull-down menu to specify the speed and duplex (where applicable) of the
uplink port
Associated Networks
(VLAN-tagged)
Network Name Displays the name of the associated networks
VLAN ID Displays the VLAN ID number
Native
Select whether native VLAN is enabled (checked) or disabled (unchecked).
Smart Link Select whether Smart Link is enabled (checked) or disabled (unchecked).
Private Network Select to designate (checked) or not to designate (unchecked) this network as
a private network.
The following table describes the available actions in the Define Shared Uplink Set screen. Clicking another
link in the pull-down menu or left navigation window causes current edits that have not been applied to be
lost.
Task Action
Add an external port Click the down arrow on Add Port. Select the enclosure, bay number, and port
number.
Set the Port Role to primary or
secondary
Click the down arrow in the Port Role column and select Primary or Secondary.
Change the uplink interface port
speed or disable the port Click the drop-down box under Speed/Duplex, and then select a setting.
Delete a port Click the Delete icon in the Delete column of the port to be deleted.
Change connection mode Click the down arrow in the box next to Connection Mode, and then select
Auto or Failover. For information on Connection Modes, see "Defining a
shared uplink set (on page 78 )."
Add an Associated Network Right-click on the header row of the Associated Networks (VLAN tagged) table
to display a menu, and then select Add.
Enable native VLAN on the
network being defined
Select the Native checkbox. Only one network can be designated as the native
VLAN.
Enable or disable Smart Link on
the network being defined Select the Smart Link checkbox.
Designate or do not designate
this network as a private
network
Select the Private Network checkbox.
Set a custom value for preferred
link connection speed or
maximum link connection speed
Select the Advanced Network Settings checkbox.
Edit associated network
properties Left-click to select an associated network, right-click to display a menu, and
then select Edit.