HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 94
Advertising
Storage management 94
•
Select Fibre Channel Settings from the Configure pull-down menu, and then click the Misc. tab.
If FC fabrics are defined on a FlexFabric module and the advanced option for automatic redistribution is
chosen, you can set the time interval to wait after a link becomes stable before automatic redistribution occurs
within the fabric. This time interval is set by left-clicking on the Misc tab of the Fibre Channel Settings screen.
The interval can be between 1 and 1800 seconds, in 1-second increments. Set the interval to the desired
value and click Apply. The same interval applies to all FC fabrics with automatic redistribution chosen. The
default for the automatic redistribution interval is 30 seconds.
Advertising
This manual is related to the following products: