Serial number (logical) settings – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 147
Server management 147
Serial Number (Logical) Settings
The serial number (logical) setting feature enables users to add a serial number (logical) and UUID (logical)
to server profiles. By configuring Virtual Connect to assign serial numbers (logical), a profile can present a
single serial number regardless of the physical server. With these configuration values added to server
profiles, software that is licensed to a particular server, based on one or both of these values, can be
migrated to new server hardware without re-licensing the software for the new server hardware. This features
prevents the user from having to reinstall serial number sensitive software after a system recovery.
If a user needs to access the physical serial number of a server blade, the OA displays both the physical and
serial numbers (logical).
After server profile creation, the following guidelines apply:
•
Serial numbers (logical) can be changed from factory default to VC-assigned.
•
Factory default serial numbers cannot be changed to serial numbers (logical).
•
User-defined serial number (logical) ranges can be expanded.
•
User-defined serial number (logical) ranges cannot be reduced.
•
All components must be at the required versions or the feature does not function:
o
OA, v2.20 or higher
o
iLO, v1.60 or higher
For additional information on required firmware versions and to download firmware upgrades, see
the HP website
CAUTION:
The use of Serial Number (Logical) Settings might prevent the proper operation of
software designed to track servers by serial number or UUID. Do not enable this feature until you
consider and understand the impact to the entire software environment in which the servers
operate. This impact includes, but is not limited to, warranty service, asset tracking, server
deployment, and software licensing.