Adding an snmp trap destination – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 48
Domain management 48
To edit or delete a trap destination, right-click on that trap destination row, and then select Edit Destination
or Delete Destination.
To apply changes made on this screen, click Apply.
Adding an SNMP trap destination
To add an SNMP trap destination, right-click on the header row of the SNMP Trap Destination table.
1.
Enter a unique name for the new trap being added. No spaces are allowed.
2.
Enter the IPv4 address or DNS name for the trap destination.
3.
Select the Trap Format: SNMPv1 or SNMPv2.
4.
Enter the SNMP trap community string for the specified trap. The default is "public."
For VC-Enet modules, the maximum trap community string length is 39.
For VC-FC modules, the maximum trap community string length is 24.
5.
Click OK to save the information and return to the main SNMP configuration screen, or continue and
select trap categories or trap severities.
If you enter information that is invalid (for example, if you use a space in the Destination name), a red box
appears around that field. Mouse over the box to see information regarding the error.
Select trap categories
Selecting a trap category allows multiple traps to be enabled or disabled as a group.