HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 49)

Domain management 49
To select VC-Enet or VC-FC trap categories, click the checkbox. To select a VCM trap category, do one of the
following:
• Highlight the item, and then click the right arrow.
• Highlight the item, and then drag and drop it into the right window.
Select trap severities
To select a trap severity, do one of the following:
• Highlight the item, and then click the right arrow.
• Highlight the item, and then drag and drop it into the right window.
For a definition of trap severities, see "Trap severities (on page 46 )." When a trap is received with the
severity listed in the right window, it is sent to the trap destination.
If you do not have the required privileges to select a category, that section is disabled. For a listing of trap
categories and the required administrative privileges, see "Trap categories and required administrative
privileges (on page 46 )."
SNMP Configuration (VC-FC)
By enabling SNMP for VC-FC modules, network management systems can monitor the VC-FC modules in the
domain for events, such as warnings and errors, that might require corrective actions. The user must have
storage or domain administrator privileges to administer SNMP FC settings.
The VC-FC SNMP settings apply to all VC-FC modules in the VC domain.