HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 80)

Network management 80
Field name Description
PID PID status icon (illuminated or not illuminated) for the port
Speed/Duplex Pull-down menu to specify the speed and duplex (where applicable) of the
uplink port. Half-duplex operations are not supported by the VC-Enet
module.
Associated Networks
(VLAN-tagged)
Network Name Displays the name of the associated networks
VLAN ID Displays the VLAN ID number
Native Select whether native VLAN is enabled (checked) or disabled (unchecked).
Smart Link Select whether Smart Link is enabled (checked) or disabled (unchecked).
Private Network Select whether to designate (checked) or not designate (unchecked) the
network as a private network.
The following table describes the available actions in the Edit Shared Uplink Set screen. Clicking another link
in the pull-down menu or left navigation window causes current edits that have not been applied to be lost.
Task Action
Rename shared uplink set Click on the uplink set name and edit. Click Apply.
Set the Port Role to primary or
secondary
Click the down arrow in the Port Role column and select Primary or
Secondary.
Change the uplink interface port
speed or disable a port Click the drop-down box under Speed/Duplex, and then select a setting.
Delete a port Left-click to select a port row, right-click to display a menu, and then select
Delete Port.
Change connection mode Click the down arrow in the box next to Connection Mode, and then select
Auto or Failover.
Add an associated network
Right-click in the Associated Networks (VLAN tagged) table to display a
menu, and then select Add. Enter the network name and VLAN ID in the fields
provided.
Enabled native VLAN on the
network Select the box under Native.
Enable Smart Link on the Network Select the box under Smart Link.
Designate the network as a
private network
Select the box under Private Network.
Delete an associated network Left-click to select a Network Name row, right-click to display a menu, and
then select Delete Network.
Shared Uplink Sets (External Connections) screen
To access this screen, click the Shared Uplink Sets link in the left VC Manager navigation window.