Define san fabric screen – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 84
Storage management 84
Define SAN Fabric screen
To define a SAN fabric, select the Define SAN Fabric link on the Home page, or click Define SAN Fabric on
the SAN Fabrics screen.
Only connect HP VC 4Gb FC module, HP VC 8Gb 24-Port FC module, or HP VC 8Gb 20-Port FC module
uplinks to Fibre Channel switch ports that are NPIV-enabled. If using a Brocade FC switch, verify that NPIV
is enabled properly by using the portshow command. If NPIV is not enabled properly, you might need to
downgrade the Brocade switch firmware, and then upgrade the firmware again.
For VC 8Gb 24-Port FC Modules, if an uplink port 8 is present in the VC SAN fabric definition, this port is
treated as the lowest-numbered port and receives server logins before any other uplink ports.
•
Single enclosure domain