Login re-distribution – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 86
Storage management 86
Task
Description
the domain is imported in double-dense mode and HP VC FlexFabric
10Gb/24-port Modules are installed in I/O Module Bays 5, 6, 7, and
8. The incorrect menu entries are those for Bay 7 and Bay 8. The ports
listed for these menu items should not be used. If they are selected, no
SAN Fabric is created. They cannot be added to an existing SAN Fabric.
Set the uplink port speed
After an uplink port has been added, click the drop-down arrow in the
Configured Speed field, and then select a speed.
Delete an uplink port
Left-click an uplink port row to select it, right-click to display a menu, and
then select Delete Port.
Save changes and remain on this
screen
Click Apply.
Clear the current, unsaved changes
and return to the home page
Click Cancel.
Login re-distribution
When creating or editing a SAN fabric using HP VC FlexFabric 10Gb/24-port Modules, select the Show
Advanced Settings checkbox to select the login re-distribution:
•
Manual Login Re-Distribution—When configured, a user is expected to initiate a Login Re-Distribution
request via VC GUI or CLI interfaces.
•
Automatic Login Re-Distribution—When configured, the VC FlexFabric module initiates Login
Re-Distribution automatically when the time interval specified expires. For more information, see "Fibre
Channel Settings (Misc.) screen (on page
)."