HP 3PAR Operating System Software - Manual (Page 233)

provisioning type to each copy. If your list of volumes contains a mix of Thin and fully
provisioned volumes, that mix is retained upon import.
•
Thin – All source volumes will be migrated as thinly provisioned.
•
Full – All source volumes will be migrated as fully provisioned.
3. Select a User CPG (required) and Copy CPG (optional).
NOTE: If there is no CPG available for the specified domain, you must exit the wizard and
create the CPG first.
4. If you selected Copy CPG, you have the option of selecting the Create virtual copies after
importing volumes check box.
a.
Select Suffix or Full Name.
b. Enter a suffix or name in the text box.
5. If not already selected, select the virtual volumes in the 1. Select the virtual volumes to be
configured during import to <destination system> window, and then click Add. (You can also
add the virtual volumes one at a time.)
6. If you are using offline migration, click Finish to create the peer volumes and begin the
migration.
7. If you are using online migration or minimally disruptive migration, click Finish to create the
peer volumes. You will receive one of the following confirmation dialogs, depending on the
migration type:
“Online Data Confirmation” (page 234)
“Minimally Disruptive Data Migration Confirmation” (page 235)
Migrating Data 233