HP 3PAR Operating System Software - Manual (Page 299)

20 Managing Drive Cages
“Viewing Drive Cages” (page 299)
“Editing Drive Cages” (page 313)
“Locating Drive Cages” (page 313)
“Editing Drive Cage Power Supplies” (page 313)
Viewing Drive Cages
The Drive Cages screen displays summary information about system drive cages and drive cage
components.
To access the Drive Cages screen:
1.
Click Systems in the Manager Pane.
2. In the Management Tree, select Drive Cages under the system with the drive cage information
you wish to view.
The Drive Cages screen provides four tabs: Summary, Power Supplies, SFPs, and Alerts. For
information about each, see:
“Viewing the Drive Cage Summary” (page 299)
“Viewing Drive Cage Power Supplies” (page 302)
“Viewing Drive Cage SFPs” (page 303)
“Viewing Drive Cage Alerts” (page 304)
To view drive cage details. See “Viewing Drive Cage Details” (page 305) .
Viewing the Drive Cage Summary
To view the Drive Cage Summary screen:
1.
Access the Drive Cages screen.
2. In the list pane, click the Summary tab.
The Summary tab provides the following information:
Description Column
The drive cage ID. ID
The drive cage name. Name
The drive cage state. See “System and Component Status Icons” (page 407) . State
The drive cage model. Model
The port on the system to which the A loop is connected. Loop A
The port on the system to which the B loop is connected. Loop B
The port speed in Gbps. Speed
Viewing Drive Cages 299