HP 3PAR Operating System Software - Manual (Page 172)

Description Column
The VLUN RAID type. RAID Type
The name of the host to which the VLUN is exported. Host
The system port on which the VLUN is exported, in Node:Slot:Port format. Port
The WWN or iSCSI name of the host. Host WWN/iSCSI Name
The VLUN's exported size in GiB. Exported Size
The VLUN type, Host Sees, Host In Set, or Matched Set. Type
The Remote Copy Status RC Status
The exported Remote Copy group. RC Group
The number of writable LUNs. Writable LUNs
Path Summary Tab
NOTE: Paths information is available for display for systems using HP 3PAR OS version 2.3.1
and later.
The following information is displayed in the Path Summary tab:
Description Column
The exported Logical Unit Number (LUN) value. LUN
The name of the exported virtual volume. Each entry is a link to the Virtual Volumes tab. Virtual Volume
The name of the host to which the VLUN is exported. Each entry is a link to the Hosts
tab. Host
The number of host WWNs visible to the system. Host Ports
WWNs reported by the host, but not visible to the system. Inactive Ports
The number of system ports that can see the host. Storage System Ports
The total number of distinct, available paths between the host and the system. Available Paths
The number of paths seen by the system reported good by the host. Healthy Paths
The used multi-pathing method. Multipath
The failed path monitoring method. Failed Path Policy
The monitoring interval in seconds after which the host checks for failed paths. Monitoring Interval
The device name for the selected VLUN on the host. Host Device Name
172 Managing VLUNs