HP 3PAR Operating System Software - Manual (Page 177)

Description Field Group
The latest running time from this AO configuration's scheduled
tasks Last Running Time
The CPG used for the tier. CPG Tier 0/Tier 1/Tier 2
The CPG's RAID type. RAID Type
Indicate the type of device (e.g., SSD, FC). Device Type
The disk speed. Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives
without spinning media (SSD). It is meant as a rough estimation of the performance difference
between the drive and the other drives in the system. For FC and NL drives, the number
corresponds to both a performance measure and actual rotational speed. For an SSD drive,
the number is to be treated as relative performance benchmark that takes into account in
I/O per second, bandwidth, and the access time.
The growth warning for the specified CPG. Growth Warning
The growth limit for the specified CPG. Growth Limit
The Alerts Tab
The AO configuration Alerts tab is divided into a list pane and a detail pane. The list pane displays
any AO-related alerts within the array. The detail pane displays details about a selected alert.
The list pane displays the following information:
Description Column
The severity of the problem. Severity
The task ID. ID
The task state (e.g. New). State
The last time the AO configuration was run. Last Time
Text message describing the reason for the alert. Message
The number of times the AO configuration task has been run. Repeat Count
The detail pane displays the following information:
Description Field Group
The severity of the problem. Severity General
The type of alert. Type
Text message describing the reason for the alert. Message
The task ID. ID
The task state (e.g. New). State
The code related to the alert message. Message Code
The alert sequence. Sequence
The system for which the alert was generated. System Component
The system's serial number. System SN
The system’s node ID). Node ID
Managing AO Configuration 177