HP 3PAR Operating System Software - Manual (Page 191)

NOTE: When creating additional groups, if you select a server other than the server selected
during the first instance of group creation, you will create a bidirectional Remote Copy
relationship where each storage server will be both the primary and backup servers to the
other.
5. Click Next.
Virtual Volumes
1. Select a Remote Copy group from the Group list.
2. Under the Source Volume on list, select a virtual volume.
3. Under the Backup Volume on list:
a.
Select either Existing or New.
b. If you selected Existing, select a backup virtual volume.
c. If you selected New:
i.
Name - Enter a name for the backup virtual volume.
ii. CPG under User CPG - Select a CPG from which the volume's user space is allocated.
iii. CPG under Copy CPG - Select a CPG from which the volume's copy space is allocated.
iv.
(Optional) In the Allocation Warning and Allocation Limit text boxes under User CPG
and Copy CPG, enter the appropriate information. You must check the Enabled
checkbox if you want you use these options.
NOTE: When selecting volumes, you can filter the lists to include by clicking the down
arrow and selecting Virtual Volumes, Provisioning, and Virtual Size. To clear the filter, click
Clear.
NOTE: If an RW snapshot is added to the group all RW of the same volume family will be
removed. The base parent will also be removed.
4. Click Add.
5. (Optional) Repeat steps 1 through 4 to add additional virtual volumes to your Remote Copy
group(s).
6. Click Next to go to the Summary page, or click Finish to complete the wizard.
Summary
Review your settings then click Finish to complete the wizard.
Configuring 1-to-N Remote Copy
NOTE: HP 3PAR Remote Copy Software requires an HP 3PAR Remote Copy license. For additional
information about the license, see the HP 3PAR OS Concepts Guide.
In a 1-to-N Remote Copy relationship, a single primary (source) system uses multiple systems as
backup systems. 1-to-N Remote Copy configurations can operate in either a combination of
unidirectional and bidirectional (for a single Remote Copy group pair), or in complete unidirectional
functionality. For the current release, a 1-to-N Remote Copy configuration can have a maximum
of two backup systems.
NOTE: In order to configure 1-to-N Remote Copy, you must have at least two available systems
with configured Remote Copy ports.
To configure 1-to-N Remote Copy:
1.
In the Manager Pane, click Remote Copy.
Configuring Remote Copy 191