HP 3PAR Operating System Software - Manual (Page 221)

Information about the Remote Copy links appears on two panes in the Management Window:
•
The left pane displays a graphical representation of the selected Remote Copy configuration.
The image includes the type of Remote Copy relationship (Remote Copy over IP or Remote
Copy over Fibre Channel) between the servers in the Remote Copy configuration, the number
of links between the Remote Copy systems, and the current state of the links (whether the links
are up or down).
You can optionally view the systems' physical connectivity by selecting the View Physical
Connectivity checkbox at the lower left side of the pane. When selected, the image displays
the Remote Copy systems' port locations, the link IP addresses, and how the ports are
connected.
•
The right pane displays information about the Remote Copy links for each Remote Copy system
in tabular format. Transmitting links are displayed as the target system's name under the Targets
column. Receiving links are displayed as receive under the Targets column. Additional
information includes each link's port location, IP address, and status.
See also:
“Manager Pane” (page 396)
“Management Tree” (page 395)
“Viewing Configured Remote Copy Systems” (page 216)
Viewing Remote Copy Targets
Remote Copy target definitions are descriptors on one Remote Copy system that identify another
a Remote Copy system. In a Remote Copy server pair, the servers are each defined as targets,
relative to each other, for Remote Copy operations.
To view Remote Copy targets:
1.
In the Manager Pane, click Remote Copy.
2. In the Management Tree, click Targets under the Remote Copy Configuration node for the
Remote Copy targets you wish to view.
Viewing Remote Copy Information 221