HP 3PAR Operating System Software - Manual (Page 298)

5. Enter a new alphanumeric serial number in the Serial Number field using numeric characters
0 to 9 and alphabetic characters A to F.
6. Click OK.
Editing Controller Node Batteries
The HP 3PAR Management Console allows you to edit controller node batteries.
NOTE: V-Class controller node battery serial numbers cannot be edited.
1. In the Manager Pane, click Systems.
2. In the Management Tree, click Controller Nodes under the system with the batteries you wish
to edit.
3. In the lower Controller Node Details pane displayed in Management Window, select the
Batteries tab.
4. Right-click the battery you wish to edit and click Edit.
5. Enter a new alphanumeric serial number in the Serial Number field using numeric characters
0 to 9 and alphabetic characters A to F.
6. Enter a new battery expiration date in the Expiration Time field. You can alternately click the
calendar button to the right of the field and select a date from the calendar that appears.
7. Click OK.
Viewing the Controller Node Battery Test Log
To view the controller node battery test log:
1.
In the Manager Pane, click Systems.
2. In the Management Tree, click Controller Nodes under the system with the batteries you wish
to edit.
3. In the lower Controller Node Details pane displayed in Management Window, select the
Batteries tab.
4. Right-click the battery with the test log you wish to view and click Show Test Log.
Resetting the Controller Node Battery Test Log
To reset the controller node battery test log:
1.
In the Manager Pane, click Systems.
2. In the Management Tree, click Controller Nodes under the system with the batteries you wish
to edit.
3. In the lower Controller Node Details pane displayed in Management Window, select the
Batteries tab.
4. Right-click the battery with the test log you wish to reset and click Reset Test Log.
5. Click Yes when prompted for confirmation.
Recharging Controller Node Batteries
The HP 3PAR Management Console allows you to recharge controller node batteries.
1.
In the Manager Pane, click Systems.
2. In the Management Tree, click Controller Nodes under the system with the batteries you
recharge.
3. In the lower Controller Node Details pane displayed in Management Window, select the
Batteries tab.
4. Right-click the battery you wish to recharge and click Re-charge.
5. Click Yes when the battery recharge confirmation dialog box appears.
298 Working with Controller Nodes