HP 3PAR Operating System Software - Manual (Page 309)

The following information for DC1 drive cages is provided:
Description Column
The interface card name. Name
Ports for each FC-AL. For FC-AL A, that is A0 and A1, and for FC-AL B, that is B0
and B1. Ports
Current state of port 0. Loop LED (Port 0)
Current state of port 1. Loop LED (Port 1)
Current state of daisy-chained drive cages (Unknown, Normal, Off, Green, Green
blink, Amber, Amber blink). Loop Split
Current state of interface card. Status LED
Link speed. Link Speed
Drive cage firmware status (Current, Not Current, Unknown). Firmware State
Current state of the current loop's CPU (Unknown, Normal, Failed, Degraded). CPU State (Self)
Current state of other loop's CPU (Unknown, Normal, Failed, Degraded). CPU State (Partner)
The following information for DCS1 and DCS2 drive cages is provided:
Description Column
The interface card name. Name
Ports for each FC-AL. For FC-AL A, that is A0 and A1, and for FC-AL B, that is B0
and B1. Ports
Current state of port A. Port A State
Current state of port B. Port V State
Link speed of port A (in Gbps). Port A Link Speed
Link speed of port B (in Gbps). Port B Link Speed
Drive cage firmware status (Current, Not Current, Unknown). Firmware State
Current state of the cage. State
Viewing the Drive Cage Magazine Details
To view drive magazine details:
1.
Access the Drive Cages screen.
2. In the list pane of the Drive Cages screen, click the Summary tab and then click a drive cage.
3. In the detail pane, click the Magazines tab.
The Magazine tab appears as follows (the following image depicts information for a DC2 drive
cage. Your screen may differ depending on the drive cage type in your system):
Viewing Drive Cages 309