HP 3PAR Operating System Software - Manual (Page 411)

Using the Complex Filter
The complex filter allows you to define specific criteria by which to search.
Access the complex filter by clicking Filter on the filtering panel.
NOTE: The entries listed under the Property list correspond to the table headings displayed in
the Management window.
Adding and Applying New Criteria
1. Select a property from the Property list.
2. Select an operator from the Operator list.
3. Select a value from the Value list.
4. (Optional) Select the Range checkbox to define a second value to compare against the first
value. This is the same as selecting in range from the Operator list.
5. Click Apply to apply the criteria.
6. Continue to add additional criteria as needed. Repeat steps 1 through 5.
Removing Criteria
To remove criteria defined in the Criteria filed, select the criteria and click Remove.
Grouping and Ungrouping Criteria
To group criteria defined in the Criteria field, select two or more criteria and click Group.
Navigating the Management Console Interface 411