HP 3PAR Operating System Software - Manual (Page 47)

Description Field Group
Maximum Transmission Unit. The greatest amount of data or
"packet" size that can be transferred at one time over a particular MTU
network connection without overburdening the connection. The
default MTU setting for an iSCSI port is 1500. When supported by
the network, an MTU value of 9000 should be used.
Data transfer rate. A value of 0 indicates that no data is being
transferred. Rate
The TCP port number used by the iSCSI card. TCP Port
Primary Internet Storage Name Service (iSNS) server IP address.
iSNS protocol allows for automated discovery, management, and
configuration of iSCSI. Primary IP Address iSNS Settings
The port on the iSNS server with which to communicate. TCP Port
The partner port. Partner Virtual Port
The WWN of the partner port. Partner WWN
Indicates if the system is in a failover state. Failover State
Sessions Tab
The following information is provided:
Description Column
Location of the iSCSI port. Position
IP address of the host that initiated the connection. IP Address
Identifier for the Target Session Identifying Handle (TSIH). TSIH
iSCSI name for the associated iSCSI host path. iSCSI
Number of connections for this session. Connection Count
Time the session started. Start Time
Hosts Tab
The following information is provided:
Description Column
Unique number for the port. Host ID
Name of a host to which the target port connects. Host Name
Name of the domain associated with the host, if applicable. Domain
IP address of the iSCSI port. IP Address
Viewing System RCIP Ports
To view system Remote Copy over IP (RCIP) port information:
1.
Access the Ports screen.
2. In the Management Window, click the RCIP tab.
Viewing System Ports 47