HP 3PAR Operating System Software - Manual (Page 86)

Host Settings
1. In the General group box:
a.
Name - Enter a new host name.
b. Host OS - Select the operating system running on the host.
c. Persona - The host persona will be visible and disabled. When Host OS is selected, the
corresponding persona will be selected for the user, and the Operating System descriptor
field will be filled with the Host OS automatically.
2. (Optional) In the Descriptors group box, edit the description information as desired in the
Location, IP Address, Operating System, Model, Contact, and Comments fields.
3. Click Next, or click Finish to close the wizard and edit the host with the information entered.
Fibre Channel
1. To assign available WWNs:
a.
Select one or more WWNs from the Available WWNs list. This list displays WWNs for
all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected WWN(s) to the Assigned WWNs list.
c. To remove assigned WWNs, select one or more WWNs from the Assigned WWNs list
and click the right arrow.
2. To assign new WWNs, enter the WWN(s) for the host in the New WWN text box and click
Assign.
3. Click Next, or click Finish to close the wizard and edit the host with the information entered.
iSCSI
1. In the iSCSI Host Paths group box:
a.
Select one or more iSCSI names from the Available iSCSI Names list. This list displays
iSCSI names for all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected iSCSI name(s) to the Assigned iSCSI Names list.
c. To remove assigned iSCSI names, select one or more iSCSI names from the Assigned
iSCSI Names list and click the right arrow.
d. To assign new iSCSI names, enter the iSCSI name(s) in the New iSCSI Name text box
and click Assign.
NOTE: Rules for the CHAP group box in the following step are as follows:
•
When clicking the Initiator CHAP check box, CHAP Name is initialized with the host name
(default).
•
The Target CHAP checkbox is enabled when the Initiator CHAP check box is selected.
•
The CHAP Secret text box is required if a CHAP Name is entered.
•
Target CHAP is optional.
•
Target CHAP can only be populated if Initiator CHAP is populated.
2. In the CHAP group box:
a.
Click the Initiator CHAP check box. The CHAP Name text box displays the host name.
b. Enter a new secret/password in the CHAP Secret text box.
c. If the CHAP Secret text box is entered in hexadecimal, click the Hex check box.
d. If required, click the Target CHAP check box. The CHAP Name text box displays the
system name.
e. Enter a new secret/password in the CHAP Secret text box.
86 Managing Hosts