HP 3PAR Operating System Software - Manual (Page 97)

The following information is provided:
Description Column
The volume name. Volume tree depth in parenthesis. Each name is a link to the
virtual volume tab. Name
The domain to which the virtual volume belongs. Domain
The name of the host set to which the volume belongs. Set
The state of the system. See “System and Component Status Icons” (page 407) . State
Indicates if the volume is a base volume, physical copy, or virtual copy. Type
Indicates if the volume is fully (Full) or thinly provisioned (TPVV). Provisioning
The volume's RAID type. RAID
The size of the volume in GiB. Virtual Size
The size of the volume's reserved user space in GiB. Reserved User Size
The percentage of used user space. Reserved User Size (% Virtual)
The size of the volume's reserved copy space. Reserved Copy Size
The percentage of used copy space. Reserved Copy Size (% Virtual)
The host to which the volume is exported. A red entry indicates an inactive VLUN.
A blue entry indicates an active VLUN. Each host name is a link to the host summary
tab. Exported To
Link Errors Details
The link errors detail screen in the detail pane provide detailed information about hosts selected
from the Host tab in the list pane.
The following information is provided:
Description Column
The World Wide Name of the port. Port WWN
The number of the port. Each port is a link to the port summary screen. Port
The arbitrated loop physical address. AL_PA
The fibre channel loop either has a loss of signal (electrical or optical) or a loss
of synchronization that is greater than the time-out period. Link Fail
Fibre channel data is not valid though there is a signal (electrical or optical). Loss Sync
Loss of signal (electrical or optical) to the receiver port of a fibre channel node. Loss Signal
Viewing Host Information 97