HP StoreEver MSL Tape Libraries - Manual (Page 29)

3. Navigate to the Configuration > Security screen.
4. In the Restore Token Backup from File pane, enter the Token Restore File Password. (The Token
Restore File Password is the Token Backup File Password used when the token backup file was
created.)
5. Click Submit Token Restore File Password.
6. Enter the location of the token backup file. (The Browse button will be active after the token
restore file password is submitted.)
Figure 18 Restore Token from File pane of the Configuration > Security screen
NOTE: Each key server token can hold up to a maximum of 100 keys. If the token backup
file and the token receiving the restore contain over 100 unique keys, the restore process will
not be initiated. You will receive warnings when the key server token is over 90% full. You
should purchase new tokens and transition to using a new token when these warnings appear.
Keys can never be deleted from the key server token.
7. Click Restore.
8. After the backup process is complete, return the first key server token in the USB port of the
autoloader or library.
9. Store the second key server token in a secure location.
CAUTION: The token must be in the USB port of the autoloader or library to read or write
encrypted data. If the token is dislodged or removed, your backups could fail. If the token is lost,
you will not be able to restore the data from your encrypted tapes unless you have a token with
the keys used to write the tapes.
Configuring encryption for the autoloader and other libraries 29