HP ProLiant DL760 G2 Server - Manual (Page 128)

Installing Hardware Options, Hot-Pluggable
Installing DIMMs into the Memory Cartridge
CAUTION: When handling a memory module, be careful not to touch any of the
contacts. Doing so may damage the module.
NOTE: Be sure that memory modules are installed in the proper orientation. The modules are
keyed to ensure that they are installed correctly in the memory socket. Refer to your system
documentation for details.
Be sure that the DIMMs are installed in bank pairs and in proper bank pair order
(1+2, then 3+4, then 5+6, then 7+8).
To install DIMMs in the memory cartridge:
1. Slide each DIMM into the appropriate socket on the memory bus (1).
2. Secure the DIMM by lifting the locking levers into place (2).
Figure 5-8: Installing SDRAM DIMMs into the memory
cartridge
HP ProLiant DL760 Generation 2 Server User Guide 5-13
HP CONFIDENTIAL
Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc
Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM