HP ProLiant DL760 G2 Server - Manual (Page 61)

Installing the Server in a Rack
IMPORTANT: Refer to the following rack documentation for further cautions:
• 9000 Rack Series Products Audio-Visual (AV) CD Kit (shipped with HP racks)
• Rack Builder Pro Configuration Tool CD (available on the HP website or ordered with the
Rack Resource CD Kit)
• Rack Products Documentation CD (available on the HP website or ordered with the Rack
Resource CD Kit)
• Rack 7000/4000 Series Rack Resource CD Kit (shipped with all Compaq 7000 and 4000
Series Racks)
Preparing the Rack for Server Installation
To prepare the rack for a server installation:
• Measure with the rack template and install cage nuts
• Install the slide bracket assemblies
Measuring with the Rack Template
The rack template provides an easy and reliable way to properly position the slide
bracket assemblies in the rack.
• The template is two-sided and is printed with arrows that show you where to
insert slide bracket assemblies on the front and back of the rack.
• Use a pencil to mark the top and bottom edges of the template against the rack
supports, identifying where the server fits and providing a starting point for
installing the next unit.
WARNING: Always mount the heaviest item on the bottom of the rack and
work from the bottom to the top.
HP ProLiant DL760 Generation 2 Server User Guide 2-17
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/26/03 9:05 AM