HP ProLiant DL760 G2 Server - Manual (Page 207)

Configuring the Server
Boot Disk Diagnostic
The boot disk diagnostic can be used to verify the presence and readiness of a
primary boot controller. If a controller is present and ready, the test also checks for a
valid operating system boot sector. All three of these tests should pass in the case
where a bootable operating system is installed on the server. If any of the tests fail,
there will be a problem booting the server.
Figure 8-13: Boot disk diagnostic
8-14 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: i-ch8 Configuring the Server.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:10 AM