HP ProLiant DL760 G2 Server - Manual (Page 54)

Installing the Server in a Rack
Shipping Brackets
To protect the power supply and I/O module from any damage during shipment, each
component is installed with a protective covering bracket.
IMPORTANT: Save the brackets in a safe location in case you have to ship the server in
the future.
1. Loosen the screw and remove the power supply shipping bracket:
a. Loosen the retaining screw (1) and rotate the bracket away from the server by
pulling on the right end of the bracket (2).
b. When the left end disengages, remove the bracket (3).
Figure 2-2: Removing the power supply shipping
bracket
2-10 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:22 AM