Symbols on equipment – HP HSG Array Controller User Manual

Page 14

Advertising
background image

xiv StorageWorks Fibre Channel Storage Switch User's Guide

Compaq Confidential – Need to Know Required

Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:

Part Number: AA-RHBYA-TE 135267-001 File Name: a-frnt Last Saved On: 4/7/99 11:57 AM

IMPORTANT: Text set off in this manner presents clarifying information or specific

instructions.

NOTE: Text set off in this manner presents commentary, sidelights, or interesting points

of information.

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions
may exist.

Any surface or area of the equipment marked with these symbols

indicates the presence of electrical shock hazards. Enclosed area

contains no operator serviceable parts.

WARNING: To reduce the risk of injury from electrical shock hazards,

do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a Network

Interface Connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to

the equipment, do not plug telephone or telecommunications

connectors into this receptacle.

Any surface or area of the equipment marked with these symbols

indicates the presence of a hot surface or hot component. If this

surface is contacted, the potential for injury exists.

WARNING: To reduce the risk of injury from a hot component, allow

the surface to cool before touching.

Power Supplies or Systems marked with these symbols

indicate the equipment is supplied by multiple sources of

power.

WARNING: To reduce the risk of injury from electrical shock,

remove all power cords to completely disconnect power from

the system.

Advertising