Telnet commands, Introduction to telnet commands, Appendix – HP HSG Array Controller User Manual
Page 141

Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Appendix
B
Telnet Commands
Introduction to Telnet Commands
This Appendix contains information and examples on managing and
monitoring the Switch via Telnet, including:
■
General Commands
■
Diagnosis Commands
■
Routing Commands
■
License Commands
Telnet Zoning commands are in Chapter 6.
The user can configure, operate, and test the Switch using the following
commands and settings through the Telnet interface.
NOTE: Screen displays in this Appendix are generic, your display will vary depending on
configuration, licenses, and port type.