HP HSG Array Controller - Manual (Page 78)

Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: e-ch4 StorageWorks Command Console Software Last Saved On: 4/7/99 12:36 PM
Chapter
4
StorageWorks Command Console
Software
Introduction
The StorageWorks Command Console (SWCC) Fibre Channel Switch
software allows you to manage the Switch, Fabric and your HSG80 Storage
Subsystem from the same window. Once the software is installed, you can
access, manage, and configure the Switch and Fabric by double-clicking on an
icon, the Fabric Window, in Command Console’s Navigation Window, shown
in Figure 4-1.
Figure 4-1. Navigation Window for a Fibre Channel Network