Adding targets to qlogic iscsi initiator, Start general configuration window, Hba port target configuration – HP 3000 Enterprise Virtual Array User Manual
Page 111: Figure 59
Advertising
Figure 59 Start general configuration window
.
Adding Targets to QLogic iSCSI Initiator
To add the HBA Port iSCSI targets:
1.
Click the green plus sign (see
).
2.
Enter the first mpx100/100b iSCSI target port IP address.
Figure 60 HBA port target configuration
.
3.
Repeat
and
for each additional mpx you want to add.
4.
Click Next.
5.
To enable the changes, enter the SMS password: config.
EVA iSCSI Connectivity User Guide
111
Advertising
This manual is related to the following products: