HP 3000 Enterprise Virtual Array - Manual (Page 130)

2. Click the Presentation tab in the VDisk Properties screen.
HP Command View lists the iSCSI host assigned to the VDisk.
3. Select the appropriate iSCSI host and click the Unpresent host(s) button.
NOTE:
If multipathing is active, HP Command View EVA recognizes and automatically unpresents the
LUN from the same iSCSI Initiator on both the mpx100 and mpx100b.
The LUN is unpresented to the iSCSI Initiator when the virtual disk is no longer presented to the
iSCSI Initiator.
Using HP Command View EVA to configure LUNs to iSCSI Initiators 130